Hangzhou Bright Rubber Plastic Product Co., Ltd. is one of the leading manufacturers and suppliers of two-color injection-molded plastic parts in China. If you're going to buy two-color injection-molded plastic parts made in China, welcome to get more information from our factory. We also accept customized orders.
Basic info
| Product Name | Rubber Silicone Dust Cover | Trademark | BRP |
| Origin | China | HS Code | 4016999090 |
| Design | 3D Drawing, STP or Igs Format | Model NO. | Customized |
| Transport Package | As your request | Production Capacity | 1000000PCS Each Month |





| Size |
as per customer requirement |
|
Material |
Rubber/silicone/PU/PVC/ EPDM,NBR, NR,SBR, SIR, FLK |
|
Product Color |
white,black, any other colors |
|
Packing |
As your request |
|
Shape |
as per customers' drawing |
|
Hardness |
20-90shore A |
| Parameters | Inch, centimeter, millimeter, etc. |
| Manufacturing | ODM & OEM Service |
| Quality certification |
Very small quantities are OK |
|
Samples Lead time |
About 3-5 days |
| Temperature | -40ºC~+230ºC |
|
Payment Terms |
L/C, T/T, WEST UNION, PAYPAL, ESCROW |
|
Port |
Hangzhou, Shanghai, Ningbo or as required |
| Lead Time | 3-30 working days(depend on the order quantity) |
Injection Molding Process Flow
Custom Plastic Injection Molding Parts And Service
Injection molding is a process in which plastic pellets are heated and melted, then injected into a mold cavity under high pressure, followed by cooling and solidification to obtain the final product. A complete production cycle typically includes the following stages:
I. Pre-forming Preparation
Custom Plastic Injection Molding Parts And Service
Raw Material Processing: Select materials according to the formula (e.g., ABS, PP, PC, PA). Hygroscopic materials (such as Nylon/Polyamide and PC) require drying at 80–120°C for 2–4 hours to prevent bubbles and silver streaks. Color masterbatches or additives may be blended as needed.
Mold Installation & Setup: Secure the mold onto the injection molding machine, adjust the ejector pin positions, preheat the mold to the process temperature (e.g., 40–80°C for ABS, 80–120°C for PC), and perform trial runs to ensure proper clamping and venting.
II. Injection Molding Cycle (Core Loop)
Custom Plastic Injection Molding Parts And Service
Each product is formed through the following sequential cycle:
|
Stage |
Operation Description |
Key Control Points |
|---|---|---|
|
① Clamping |
The moving mold closes and locks with the fixed mold to withstand the internal melt pressure during injection. |
Clamping force must exceed cavity pressure × projected area. |
|
② Plasticizing & Metering |
Pellets are heated in zones within the barrel and sheared by the screw, melting into a homogeneous viscous fluid while being metered. |
Barrel temperature, back pressure, screw speed. |
|
③ Injection |
The screw pushes forward, injecting the melt through the nozzle, runner, and gate into the cavity at high speed and pressure (filling approx. 95%–98%). |
Injection pressure (50–150 MPa), speed, temperature. |
|
④ Dwelling (Holding Pressure) |
Pressure is maintained after filling to compensate for material shrinkage by feeding additional melt until the gate freezes off. |
Holding pressure (approx. 60%–80% of injection pressure), holding time. |
|
⑤ Cooling |
Cooling media circulate within the mold to lower the part temperature below its heat deflection temperature for solidification (typically 50%–80% of the total cycle time). |
Cooling time, uniformity of mold water temperature. |
|
⑥ Mold Opening & Ejection |
The mold opens, and ejector pins/plates push the part out smoothly. |
Ejection speed and force; prevent ejection marks or sticking. |



Hot Tags: two-color injection-molded plastic parts, china, manufacturers, suppliers, factory, customized, made in China







