Hangzhou Bright Rubber Plastic Product Co., Ltd. is one of the leading manufacturers and suppliers of nylon with 30%gf injection plastic knob in China. If you're going to buy nylon with 30%gf injection plastic knob made in China, welcome to get more information from our factory. We also accept customized orders.
1.Product Description
Nylon is one of the most widely used plastics because of its extreme strength, wear resistance, and self-lubricating properties. Nylons are also known to be resilient and nonmarring, have high impact resistance has a continuous operating temperature of about 180º F and a relatively lightweight that makes it ideal for use in mechanical and electrical hardware to ease maintenance and replacement procedures. Nylon is commonly used as a replacement for bronze, brass, aluminum, steel, and other metals to reduce weight and noise from metal to metal contact. Nylon 6/6 has the tendency to absorb moisture but is the least permeable to gasoline/mineral oil/fluorocarbon-refrigerant, the strongest, and most widely used, of all nylons. Its high crystallinity results in a sharp melting point, making its mechanical properties less affected by temperature. It can be found in the form of rod, tubing, or plate.
30% glass-filled nylon type 6/6 is a glass-reinforced extruded nylon 6/6. The glass reinforcement gives the material higher compressive strength and rigidity, as well as improved frictional characteristics.
2.Application
-
Washers and stampings
-
Timing sprockets
-
Speedometer gears
-
Cooling fans
-
Wire connectors
-
Windshield wiper parts
-
Door-latch hardware
-
Molded fender extensions
-
Brake fluid reservoirs
-
Bearings
-
Business machines
-
Appliances
-
Industrial equipment
3.Properties
-
Lightweight
-
Ability to operate without lubrication
-
High tensile strength
-
High elasticity
-
High heat distortion temperature
-
Resist wear, abrasion, and vibration
-
Can withstand sustained contact with a wide range of chemicals, alkalies, dilute acids, or oxidizing agents
-
Absorbs moisture
-
Low permeability to gasoline, mineral oil, and fluorocarbon-refrigerant
Hot Tags: nylon with 30%gf injection plastic knob, china, manufacturers, suppliers, factory, customized, made in China, ABS Bicycle Plastic Fastening Adjusting Accessories, Auto Black Plastic Protective Fastener, Injection Plastic Parts, PMMA Injection Plastic Parts, Recycled Black PP Injection Plastic Parts, White PET Injection Plastic Tube
