Hangzhou Bright Rubber Plastic Product Co., Ltd. is one of the leading manufacturers and suppliers of Drum-Type Rubber Ship FenderWheel-Shaped Marine Rubber Fender / Dock Bumper for Ship Protection in China. If you're going to buy Drum-Type Rubber Ship FenderWheel-Shaped Marine Rubber Fender / Dock Bumper for Ship Protection made in China, welcome to get more information from our factory. We also accept customized orders.
In marine infrastructure, the structural integrity of berthing systems depends heavily on the energy absorption capacity of the fendering system. Drum-type rubber ship fenders are widely utilized in port terminals, dry docks, and river locks due to their high energy absorption capabilities and relatively low reaction forces. As a manufacturing facility specializing in marine rubber products, our production focuses on material formulation, vulcanization consistency, and dimensional accuracy rather than marketing claims. This overview outlines the technical parameters and manufacturing considerations for drum-type rubber fenders.
Drum-type rubber fender is the most widely used type of fender in the world. It has a reasonable structure, reduces the stress concentration phenomenon at the root of the fender during compression deformation, makes the fender more evenly stressed and has better stability. It has the characteristics of strong stability, high energy absorption and high load, and has the smallest compression deformation among all large fender types.

Material Compound and Vulcanization Process
The performance of a drum fender is determined by the rubber compound used during manufacturing. We utilize natural rubber (NR) or chloroprene rubber (CR) compounds depending on the application environment. Natural rubber offers superior tear resistance and resilience, making it suitable for general commercial berthing. Chloroprene provides enhanced resistance to oil, ozone, and UV degradation, which is necessary for ports with heavy vessel traffic or harsh environmental exposure.
Each batch of compound undergoes laboratory testing before processing to verify hardness, tensile strength, elongation at break, and compression set values. The mixing process follows standardized procedures to ensure uniform dispersion of carbon black, sulfur, and accelerators. Inconsistent mixing leads to weak spots in the final product, so we maintain strict control over mixing times and temperatures.
Vulcanization is performed in large-diameter autoclaves under controlled temperature and pressure cycles. Proper curing is critical for achieving the designed mechanical properties. Under-cured rubber lacks durability, while over-cured rubber becomes brittle. Our production records track cure time, temperature, and pressure for each unit to maintain traceability throughout the manufacturing process.
Structural Design and Energy Absorption Characteristics
Drum fenders feature a cylindrical body with reinforced front and back panels. The internal cavity allows for progressive deformation as vessels make contact, converting kinetic energy into elastic strain energy within the rubber matrix. The geometric design influences both energy capacity and reaction force. Higher profile drums absorb more energy but generate greater reaction forces against the wharf structure.
We manufacture standard series including H1000, H1250, H1500, and H2000 models, with corresponding variations in diameter, length, and wall thickness. Custom dimensions can be produced when project specifications require non-standard configurations. During tooling fabrication, shrinkage allowances are calculated based on the specific compound being used, typically ranging from 1.5% to 3%, to ensure finished dimensions meet engineering drawings.
Reinforcement layers may be incorporated into the drum body for applications requiring higher load capacity. Steel cord or fabric plies are embedded between rubber layers during the lay-up process before vulcanization. These reinforcements prevent excessive deformation and improve fatigue resistance under repeated loading cycles.

Installation Hardware and Corrosion Protection
A drum fender functions as part of an integrated system that includes anchor chains, shackles, and face pads. We supply complete assemblies with hardware selected based on the expected service loads. Anchor chains connect the fender to the wharf structure, while face pads distribute point loads across the vessel hull.
All metal components receive corrosion protection treatment appropriate for marine environments. Hot-dip galvanizing is the standard finish for chain links and shackles, providing sacrificial zinc coating that resists saltwater corrosion. Stainless steel options are available for applications where galvanized hardware is unsuitable. Face pads are typically manufactured from ultra-high molecular weight polyethylene (UHMWPE) or similar low-friction materials to reduce friction during vessel berthing.
Chain tension management is addressed through adjustable turnbuckles or slip joints in the anchor chain assembly. Proper installation ensures even load distribution across multiple fenders and prevents individual units from bearing disproportionate forces during off-center berthing events.
Quality Testing and Verification Procedures
Every drum fender leaving our facility undergoes visual inspection for surface defects, mold flash, and dimensional compliance. Critical dimensions are verified against approved drawings using calibrated measurement equipment. Samples from each production batch are subjected to destructive testing to confirm material properties match specification requirements.
Compression testing verifies that fenders achieve rated deflection at specified loads without permanent deformation. Hardness measurements are taken at multiple locations to detect any curing inconsistencies. For projects requiring third-party certification, we coordinate with recognized classification societies and testing laboratories to provide independent verification of product performance.
Production documentation includes material certificates, test reports, and installation guidelines. Each fender receives a unique identification marking that corresponds to its production batch record, enabling full traceability from raw material receipt through final delivery.
Hot Tags: Drum-Type Rubber Ship FenderWheel-Shaped Marine Rubber Fender / Dock Bumper for Ship Protection, china, manufacturers, suppliers, factory, customized, made in China, Black EPDM Gasket With Date Mark, PP Plastic Colorful Wheel In Different Structures Sizes For Children Toy Car Use, Custom Molded Injection Plastic Parts, Black EPDM 70 Shore A Side Block, Sponge Rubber Cleaning Ball, Rubber Bushing For Automotive







